Cemb k8 operators manual

Horizontal Balancers. Vertical Balancers. Portable Equipment. See Our YouTube Videos. One Company Three Solutions.

Why Choose Us? It has been sent. Please try again later. Follow Us For More Updates. Portal Login. This is not the result of an incorrect indication by the machine, but only of incorrect mounting of the wheel on the flange, i. If the wheel has been mounted on the flange with screws, it may be that the screws have not been tight- ened correctly in gradual criss-cross manner one after the other, or as often occurs holes have been drilled in the wheel with too wide tolerances.

Small errors, up to 10 grams 0. If, after balancing, the wheel is still unbalanced when refitted on the vehicle, this could be due to the unbalance of the brake drum or very often is due to the screw holes in the rim and the drum drilled with too wide tolerances. In this case a readjustment would be advisable using the wheel balancer with the wheel mounted.

Before carrying out any operation on the machine, cut the power supply to the machine. A protection fuse is fitted on the power board, accessible by dismantling the weight shelf see Exploded Drawings. If fuses require replacement, use ones with an identical current rating.

If the fault persists, contact Technical Service.